DTC B1207-09: Error Signal Received From SAS Control Module (ESU): Notes
DTC B1207:09 (ELECTRICAL SUPPLY UNIT) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Error signal received from SAS control module |
| Detection condition |
- The electrical supply unit (ESU) detected the following conditions for 2 s or more with the ignition switched ON (engine off or on).
- A signal is received which cannot normally determine the collision conditions from SAS control module even though the collision detection unlock function presence signal received from the BCM determines that the function is present.
|
| Fail-safe |
Not applicable |
| Possible cause |
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |