Diagnostic Procedure
DTC U0028:88 (CONNECTIVITY MASTER UNIT) DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY IF OTHER DTCs DISPLAYED FOR CONNECTIVITY MASTER UNIT (CMU)
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC U0184:00/U0187:00 [CONNECTIVITY MASTER UNIT] .) |
| No | Go to the next step. | ||
| 2 | VERIFY IF MALFUNCTIONING LOCATION IS CONNECTIVITY MASTER UNIT (CMU) DEPENDING ON REPEATABILITY
|
Yes | Replace the connectivity master unit (CMU), then go to the next step. (See CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 3 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [CONNECTIVITY MASTER UNIT] .) |
| No | DTC troubleshooting completed. | ||