LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seats) >> Front Seat Removal/Installation >> Driver's Side

Driver's Side

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal and wait for 1 min or more. (Without power seat system) (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the head restraint.
  3. Slide the front seat to the positions where the bolts shown in the figure below can be removed.
  4. Remove the bolts.
    Fig 1: Front Seat Front Bolts With Torque Specification - Driver'S Side
    G12236089Courtesy of MAZDA MOTORS CORP.
  5. Slide the front seat to the positions where the bolts shown in the figure below can be removed.
  6. Remove the bolts.
    Fig 2: Front Seat Rear Bolts With Torque Specification - Driver'S Side
    G12236090Courtesy of MAZDA MOTORS CORP.
  7. Disconnect the negative battery terminal and wait for 1 min. or more. (With power seat system) (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  8. Slide the lock in the direction of arrow (1) shown in the figure below, and while pressing the tab in the direction of arrow (2), disconnect the connector in the direction of arrow (3).
    Fig 3: Sliding Lock
    G11543609Courtesy of MAZDA MOTORS CORP.
  9. Remove the front seat.
  10. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals