LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Control System (VIN 5)) >> Camshaft Position (CMP) Sensor Removal/Installation >> Exhaust CMP Sensor

Exhaust CMP Sensor

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Disconnect the exhaust CMP sensor connector.
  4. Remove the exhaust CMP sensor.
    Fig 1: Exhaust CMP Sensor With Bolt
    G11427353Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals