LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Touring >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> License Plate Light Removal/Installation

License Plate Light Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Trunk lid recess (See TRUNK LID RECESS REMOVAL/INSTALLATION .)
    2. Trunk lid trim (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
    3. Trunk lid garnish cover (See TRUNK LID GARNISH REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    G12234931Courtesy of MAZDA MOTORS CORP.
  4. While pressing the license plate light tabs in the direction of arrows (1) shown in the figure, press the license plate light in the direction of arrow (2) to detach the license plate light tabs from the trunk lid.
    G12234932Courtesy of MAZDA MOTORS CORP.
    CAUTION:
    • If the license plate light is removed from the trunk lid, the license plate light may fall off and be damaged. When removing the license plate light from the trunk lid, hold the license plate light on lens side with a hand during servicing.
  5. Remove the license plate light.
    G12234933Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals