LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Manual Transaxle - Overhaul [C66M-R]) >> Transaxle Assembly >> Step 1 >> Bearing outer race, shim, Transaxle case component assembly note

Bearing outer race, shim, Transaxle case component assembly note

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the bearing outer race to the secondary shaft component.
    Fig 1: Identifying Bearing Outer Race
    G08347963
  2. Assemble the shims.
    Fig 2: Identifying Bearing Outer Race Shims
    G08347964
  3. Apply silicone sealant to the transaxle case component as shown in the figure.
    Fig 3: Identifying Transaxle Case Component Silicone Sealant
    G08347965
  4. Assemble the transaxle case component.
    CAUTION:
    • Assemble the transaxle case component before the applied silicone sealant starts to harden.
    Fig 4: Transaxle Case Bolts With Torque Specifications
    G08347946
scientia non olet · About LEMON Manuals