LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Manual Transaxle - Overhaul [C66M-R]) >> Secondary Shaft Component Assembly >> Secondary 5th Gear Assembly Note

Secondary 5th Gear Assembly Note

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the secondary shaft component, secondary 5th gear, and the SST  in a press as shown in the figure.
    Fig 1: Setting Secondary Shaft Component, Secondary 5th Gear And SST In Press
    G08347895
  2. Move the clutch hub sleeve in the axial direction while pressing the secondary 2nd gear by hand so that it does not move, and verify that the synchronizer key is assembled correctly.
  3. Assemble the secondary 5th gear using the press.
    Fig 2: Assemble Secondary 5th Gear Using Press
    G08347896
scientia non olet · About LEMON Manuals