Setting method by operation of remote transmitter button

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

The following setting can be changed by operation of the remote transmitter button.

M-MDS Display	Function	Initial Setting	Setting Content	Control Unit
Lock Beep Volume.	The keyless beeper volume can be adjusted.	Medium	Off/Low/Medium/High	Start stop unit

Change the setting for the keyless beeper volume referring to the following procedure:
NOTE:
- If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
  - The ignition is switched to ACC or ON (engine off or on).
  - The driver's door is closed.
  - The liftgate is open.
  - The remote transmitter operation is not performed for approx. 10 s.
  - The UNLOCK button on the remote transmitter is pressed.
  - A request switch is pressed.
Fig 1: Keyless Beeper Volume Setting Changing Procedure Flowchart
Courtesy of MAZDA MOTORS CORP.