Indicator Unit Short-Cord Inspection

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Remove the following parts:
1. Sensor cover (See SENSOR COVER REMOVAL/INSTALLATION .)
2. Indicator unit (See INDICATOR UNIT REMOVAL/INSTALLATION .)
3. Indicator unit short-cord (See INDICATOR UNIT SHORT-CORD REMOVAL/INSTALLATION .)
Verify that the continuity between the indicator unit short-cord terminals is as indicated in the table.

Fig 1: Indicator Unit Short-Cord Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Checking Continuity Between Indicator Unit Short-Cord Terminals
Courtesy of MAZDA MOTORS CORP.
- If not as indicated in the table, replace the indicator unit short-cord.