LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (On-Board Diagnostic - Connectivity Master Unit) >> Diagnostic Assist Function (Connectivity Master Unit) >> Using Commander Switch

Using Commander Switch

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Input the diagnostic assist code by rotating the commander knob.
    Fig 1: Connectivity Master Unit Diagnostic Assist Function
    G12234722Courtesy of MAZDA MOTORS CORP.
  2. Press the commander knob.
  3. Perform the inspection according to the diagnostic assist code list. (See Diagnostic Assist Code List .)
    NOTE:
    • If [- REJECTED] is displayed, the inspection cannot be performed because communication is not enabled between the related parts, or the conditions are not met even if communication is enabled. Therefore, verify the display [- REJECTED] referring to the following procedure. (See[- REJECTED] is displayed.)
scientia non olet · About LEMON Manuals