LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Front Suspension System) >> Front CROSSMEMBER Removal/Installation >> Insulator Installation Note

Insulator Installation Note

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fasteners in the order shown in the figure below.
    Fig 1: Insulator Fasteners Tightening Sequence
    G12232378Courtesy of MAZDA MOTORS CORP.
  2. Install the bolts.