Using the M-MDS
- Connect the M-MDS to the DLC-2.
- After vehicle identification, select the following from the M-MDS initialization screen.
- "DataLogger" (2) "Modules" (3) "IC"
- Using "SPDMTR", verify that the displayed information is as indicated in the table.M-MDS DISPLAY DESCRIPTION
M-MDS display Instrument cluster display 60 km/h Speedometer needle moves to approx. 58-62 km/h {36-39 mph}. 120 km/h Speedometer needle moves to approx. 117-123 km/h {72.8-76.4 mph}. Off Speedometer needle moves to the bottommost position. - If the speedometer does not operate or the indication is not within the allowable range, inspect the DTC inspection for the following control module and the related wiring harnesses.
- PCM
- TCM (ATX)
- DSC HU/CM
- If the PCM, TCM (ATX), DSC HU/CM, and related wiring harnesses are normal, replace the instrument cluster.
- If the speedometer does not operate or the indication is not within the allowable range, inspect the DTC inspection for the following control module and the related wiring harnesses.