LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> Body & Frame >> Seats >> Rear Seat Back Latch Removal/Installation

Rear Seat Back Latch Removal/Installation

  1. Disconnect the negative battery terminal. (With rear seat warmer system) (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION .)
    2. Rear seat side back (See REAR SEAT SIDE BACK REMOVAL/INSTALLATION .)
    3. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
    4. C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION .)
    5. High-mount brake light (See HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION .)
    6. Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the remote cable.
  4. Remove the nuts.
    Fig 1: Rear Seat Back Latch Nuts With Torque Specification
    G11543665Courtesy of MAZDA MOTORS CORP.
  5. Remove the rear seat back latch.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals