Side Camera Image Not Clear/No Image On Screen: Notes

NOTE:

The image range may differ depending on the road surface conditions and the vehicle conditions. In addition, the side camera cannot shoot images near the front bumper and below the front bumper.
Under the following conditions, images captured by the side camera may be difficult to see, however this does not indicate a malfunction.

Light from the sun or a vehicle's headlights is reflected off the lens
The image area is dark due to low light levels such as in the evening
The temperature around the lens increases or decreases
Water droplets, snow, or mud is on the lens

When all of the following conditions are met, the side monitor is displayed.
- Ignition switch ON (engine off or on)
- 360°view monitor switch ON
- Selector lever at not R position (ATX)
- Shift lever at not reverse gear position (MTX)
- Vehicle speed is less than 20 km/h