DTC P0106-00: Map Sensor Circuit Range/Performance Problem: Outline

DTC P0106:00 (PCM, VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	MAP sensor circuit range/performance problem
Detection condition	Any one of the following conditions is met: The condition has continued for 2 s in which difference in barometric pressure measured and manifold absolute pressure is more than 12.0 kPa {0.122 kgf/cm² , 1.74 psi}, difference in manifold absolute pressure and turbocharger/supercharger boost pressure is less than -13.3 kPa {-0.136 kgf/cm² , -1.93 psi} and difference in manifold absolute pressure and exhaust pressure is less than -30.7 kPa {-0.313 kgf/cm² , -4.45 psi}. The condition has continued for 2 s in which difference in barometric pressure measured and manifold absolute pressure is less than -12.0 kPa {-0.122 kgf/cm² , -1.74 psi}, difference in manifold absolute pressure and turbocharger/supercharger boost pressure is more than 13.3 kPa {0.136 kgf/cm² , 1.93 psi} and difference in manifold absolute pressure and exhaust pressure is more than 30.7 kPa {0.313 kgf/cm² , 4.45 psi}. Precondition Period vehicle being left: 6 h or more Battery voltage: 10 V or more Within 20 s after engine start The following DTCs are not detected: MAP sensor: P0107:00 and P0108:00 Boost pressure sensor: P0237:00 and P0238:00 Exhaust gas pressure sensor: P0472:00 and P0473:00 BARO sensor: P2228:00 and P2229:00
Fail-safe	Not applicable
Possible cause	MAP sensor/IAT sensor No. 2 connector or terminals malfunction MAP sensor malfunction PCM connector or terminals malfunction PCM malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable