Indicator Inspection: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
- The indicator is integrated with the shift panel.
- Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
- Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).
- If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.
- If the inspection items are normal, replace the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
- If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.