Using the M-MDS

Connect the M-MDS to the DLC-2.
After vehicle identification, select the following items from the initialization screen of the M-MDS.
1. "Toolbox"
2. "Diagnosis"
3. "Data Logger"
4. "IC"

Using the simulation function SPD_MTR, verify that the values are as indicated in the table.

M-MDS display	Tachometer display
0%	Tachometer needle moves to bottommost position.
20%	Tachometer needle moves to approx. 60km/h {37.3 mph}.
40%	Tachometer needle moves to approx. 120 km/h {74.6 mph}.

If not as indicated in the table, inspect the related wiring harnesses.
- If the related wiring harnesses are normal, replace the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)