PID/Data Monitor Table: Notes
NOTE:
- The PID data screen function is used for monitoring the calculated value of input/output signals in the module. Therefore, if the monitored value of the output components is not within the specification, it is necessary to inspect the monitored value of input components corresponding to the applicable output component control. In addition, because the system does not display an output component malfunction as an abnormality in the monitored value, it is necessary to inspect the output components individually.
- When detecting DTCs, PIDs related to a malfunctioning system may not display even if the module is normal. Therefore, if a PID is not displayed, it is necessary to verify the DTC, perform malfunction diagnosis of the DTC that was detected, and do repairs.