LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle (Service Information) (ET6A-El) >> Initial Learning >> Initial Learning Procedure >> Initial learning procedure

Initial learning procedure

  1. Connect the M-MDS.
  2. Perform the automatic transaxle initial learning.
  3. Using the M-MDS, verify that DTC P06B8:00 has not been stored. (See DTC INSPECTION .)
scientia non olet · About LEMON Manuals