LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> On-Board Diagnostic - Engine Control System (VINS 7, L, M) (Introduction) >> Inappropriate Operation And Control Record >> Operation Procedure

Operation Procedure

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off or on).
  3. Perform the following procedure using the M-MDS.
    1. Press [Start] for the vehicle identification.
    2. Press the [Toolbox] tab.
    3. Press the [Diagnosis] icon.
    4. Press [Operational records].
    5. Press [ENGINE].
    6. Press [Reading Operation records of vehicle protection against internal failure].
  4. For details regarding the procedure, follow the instructions indicated on the M-MDS.
scientia non olet · About LEMON Manuals