LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> On-Board Diagnostic - MAZDA Connect (1 Of 5) >> Diagnostic Assist Function >> Settings/programmed information initialization

Settings/programmed information initialization

  1. Launch the diagnostic assist function. (See ACTIVATION PROCEDURE .)
  2. Select in the following order from the diagnostic assist function initial screen.
    1. [Diagnostic Test]
    2. [System Self-Diagnostic Test]
    3. [Settings/Registered Information Initialization]
  3. Perform initialization for each type of setting and programmed information according to the directions on the screen.
  4. The diagnostic assist function ends and the center display initial screen launches.
scientia non olet · About LEMON Manuals