Error code 06/08

ERROR CODE (06/08) INSPECTION AND ACTION DESCRIPTION

Step	Inspection	Action
1	PERFORM FSC AIMING Perform the FSC aiming. Is the FSC aiming procedure completed correctly?	Yes	FSC aiming procedure is completed.
1		No	DTC 06/08 is displayedError code other than error code 06/08 is displayed Go to the next step. Go to the procedure for the displayed error code.
2	VERIFY DTC Perform the DTC inspection for the FSC. (See DTC INSPECTION .) Is a DTC displayed?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [FORWARD SENSING CAMERA (FSC) (US)] .) (See DTC TABLE [VEHICLE CONTROL MODULE (US)] .)
2		No	PERFORM FSC AIMING AGAIN Switch the ignition OFF. Close all doors and wait for 6 min or more. Perform the FSC aiming procedure again and if it is not completed successfully, replace the FSC. (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)