Error code 12/15/17/19/1A

ERROR CODE (12/15/17/19/1A) INSPECTION AND ACTION DESCRIPTION

Step	Inspection	Action
1	PERFORM SIDE CAMERA AIMING Perform the side camera aiming. Was the side camera aiming procedure completed correctly?	Yes	The side camera aiming is completed. Perform the 360° view monitor system screen display verification procedure. (See 360° VIEW MONITOR SYSTEM SCREEN DISPLAY VERIFICATION PROCEDURE .)
1		No	If error code 12/15/17/19/1A is displayed Go to the next step. If code other than error code 12/15/17/19/1A is displayed Go to the procedure for the displayed error code.
2	VERIFY DTCs Perform the DTC inspection. (See DTC INSPECTION .) Is a DTC displayed?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [360°VIEW MONITOR CONTROL MODULE (US)] .) (See DTC TABLE [VEHICLE CONTROL MODULE (US)] .)
2		No	If the side camera aiming is not completed correctly after performing the side camera aiming again, replace the 360° view monitor control module. (See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION [(US)] .)