LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> MX-5 Miata RF Club, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Lighting System) >> Side Turn Light Removal/Installation

Side Turn Light Removal/Installation

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the steering wheel to the side where the light is to be removed until it locks.
  2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  3. Partially peel back the front mudguard No. 2 (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
  4. Disconnect the connector.
    Fig 1: Disconnecting Connector
    G10954745Courtesy of MAZDA MOTORS CORP.
  5. While pressing the side turn light tab in the direction of arrow (1) shown in the figure, press the side turn light in the direction of arrow (2) and detach the side turn light tab from the front fender panel.
    Fig 2: Pressing Side Turn Light Tab
    G10954746Courtesy of MAZDA MOTORS CORP.
  6. Pull the side turn light in the direction of arrow (3) shown in the figure and remove it from the front fender panel.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals