Immobilizer System
WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
- x: Applicable-: Not applicable
DTC DESCRIPTION (START STOP UNIT)
| DTC | KEY warning light (red)(2) | Multi-information display(3) | Push button start indicator light (amber) | Description | Fail-safe | Drive cycle | Self test type(4) | Memory function | Service Information | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M-MDS display(1) | ||||||||||||||||||||
| Start stop unit | PCM | |||||||||||||||||||
| U3000:96 | P1260:00 | 09 | On | Display | Flash | Start stop unit malfunction | - | - | C | x | (See SECURITY INDICATOR LIGHT: 09, DTC: U3000:96/P1260:00 [START STOP UNIT] .) | |||||||||
| B10D9:87 | P1260:00 | 11 | - | - | Flash | Coil antenna (built into push button start) error | - | - | C | - | (See SECURITY INDICATOR LIGHT: 11, DTC: B10D9:87/P1260:00 [START STOP UNIT] .) | |||||||||
| B13D3:05 | P1260:00 | 13 | - | - | - | Remote transmitter program error | - | - | C | - | (See SECURITY INDICATOR LIGHT: 13, DTC: B13D3:05/P1260:00 [START STOP UNIT] .) | |||||||||
| B13D3:94 | P1260:00 | 13 | - | - | - | Communication error with remote transmitter | - | - | C | - | (See SECURITY INDICATOR LIGHT: 13, DTC: B13D3:94/P1260:00 [START STOP UNIT] .) | |||||||||
| B13D3:51 | P1260:00 | 15 | - | - | Flash | Unregistered remote transmitter is detected | - | - | C | - | (See SECURITY INDICATOR LIGHT: 15, DTC: B13D3:51/P1260:00 [START STOP UNIT] .) | |||||||||
| U0100:87 | P1260:00 | 16 | - | - | - | Communication error with PCM (no response or data mis-match) | - | - | C | - | (See SECURITY INDICATOR LIGHT: 16, DTC: U0100:87/P1260:00 [START STOP UNIT] .) | |||||||||
| B13D4:00 | P1260:00 | 21 | On | Display | - | Insufficient remote transmitter programming number | - | - | C | - | (See SECURITY INDICATOR LIGHT: 21, DTC: B13D4:00/P1260:00 [START STOP UNIT] .) | |||||||||
| B10DA:51 | P1260:00 | 22 | - | - | - | Communication error with PCM (data received failure) | - | - | C | - | (See SECURITY INDICATOR LIGHT: 22, DTC: B10DA:51/P1260:00 [START STOP UNIT] .) | |||||||||
| B10DA:62 | P1260:00 | 23 | - | - | - | Communication error with PCM (code mis-matched) | - | - | C | - | (See SECURITY INDICATOR LIGHT: 23, DTC: B10DA:62/P1260:00 [START STOP UNIT] .) | |||||||||
|
||||||||||||||||||||