Front Oil Seal Replacement: Notes

Special Service Tool (SST)

Mazda SST number Global SST number
49 UN20 5072 205-072 Holder	Courtesy of MAZDA MOTORS CORP.	49 B011 105 - Adapter	Courtesy of MAZDA MOTORS CORP.	49 H010 401 - Oil seal installer	Courtesy of MAZDA MOTORS CORP.

WARNING:

A hot engine can cause severe burns. Turn off the engine and wait until it is cool before servicing.
1. Remove the front under cover No. 2. (See FRONT UNDER COVER NO. 2 REMOVAL/INSTALLATION .)
2. Remove the front splash shield (RH). (See FRONT SPLASH SHIELD REMOVAL/INSTALLATION .)
3. Remove the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION .)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.

Remove the front under cover No. 2. (See FRONT UNDER COVER NO. 2 REMOVAL/INSTALLATION .)
Remove the front splash shield (RH). (See FRONT SPLASH SHIELD REMOVAL/INSTALLATION .)
Remove the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION .)
Remove in the order indicated in the table.

Install in the reverse order of removal.

Fig 1: Front Oil Seal Components With Torque Specification

G12228073

Courtesy of MAZDA MOTORS CORP.

COMPONENT DESCRIPTION

1	Crankshaft pulley lock bolt (See CRANKSHAFT PULLEY LOCK BOLT REMOVAL NOTE .) (See CRANKSHAFT PULLEY LOCK BOLT INSTALLATION NOTE .)
2	Crankshaft pulley
3	Front oil seal (See FRONT OIL SEAL REMOVAL NOTE .) (See FRONT OIL SEAL INSTALLATION NOTE .)