Insulator Removal Note
WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The insulator is installed using rivets.
- Push out the mandrel using a hammer and punch (2-2.8 mm {0.08-0.11 in} diameter).
 Courtesy of MAZDA MOTORS CORP.
|
- Remove the flange using a drill (5 mm {0.2 in} drill bit).
 Courtesy of MAZDA MOTORS CORP.
|