LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Automatic Transaxle Shift Mechanism) >> Shift-Lock System Inspection >> Shift-Lock Solenoid Inspection

Shift-Lock Solenoid Inspection

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The shift-lock solenoid is built into the selector lever component.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Selector lever knob (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION .) (2) Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION .)
  3. Reconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  4. Verify that the voltages of each of the selector lever component terminals are as indicated in the table.
G11279404Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals