LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostics - Dynamic Stability Control >> DTC U0336-00: Signal Error From SAS Control Module >> Diagnostic Procedure

Diagnostic Procedure

DTC U0336:00 (DYNAMIC STABILITY CONTROL) DIAGNOSTIC PROCEDURE

STEP INSPECTION ACTION
1 VERIFY SAS CONTROL MODULE DTC Yes Go to applicable DTC inspection.
(See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] .)
DTC troubleshooting completed, then go to the next step.
No Go to the next step.
2 VERIFY DTC TROUBLESHOOTING COMPLETED
  • Using the M-MDS, clear the DTC from the DSC HU/CM. (See CLEARING DTC .)
  • Using the M-MDS, perform the DSC HU/CM DTC inspection. (See DTC INSPECTION .)
  • Is the same DTC present?
 Yes Repeat the inspection from Step1 If the malfunction recurs, replace the SAS control module, then go to the next step.
(See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.] .)
No Go to the next step.
3 VERIFY NO DTC IS PRESENT
  • Are any DTCs present?
 Yes Go to applicable DTC inspection.
(See DTC TABLE .)
No DTC troubleshooting completed.
scientia non olet · About LEMON Manuals