LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Sport, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Engine Mechanical System) >> Timing Chain Removal/Installation >> Water Outlet Component Removal Note

Water Outlet Component Removal Note

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the upper radiator hose.
    G11275882Courtesy of MAZDA MOTORS CORP.
  2. Disconnect the heater hose.
    G11275883Courtesy of MAZDA MOTORS CORP.
  3. Set the engine coolant temperature sensor No. 1 wiring harness aside using the following procedure:
    G11275884Courtesy of MAZDA MOTORS CORP.
    1. Disconnect the engine coolant temperature sensor No. 1 connector.
    2. Remove the clip and set the wiring harness aside.
  4. Remove the water outlet component.
    G11275885Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals