Common Specs & Procedures Index

CX-5 COMMON SPECS & PROCEDURES

System		Specification/Procedure
Air Conditioning
Service		HVAC TECHNICAL DATA
Torque		See Torque Specifications in appropriate graphics under BASIC SYSTEM - HVAC .
Axle Nut/Hub Nut
Front		Step 1 74-110 Ft. Lbs. (100-150 N.m) Step 2 Loosen 180 Degrees Step 3 175-202 Ft. Lbs. (236-274 N.m)
Rear		Step 1 74-110 Ft. Lbs. (100-150 N.m) Step 2 Loosen 180 Degrees Step 3 175-202 Ft. Lbs. (236-274 N.m)
Battery		BATTERY INSPECTION
Brakes
Bleeding Sequence		See - BRAKE FLUID AIR BLEEDING .
Disc Brakes
	Service Specifications	BRAKES TECHNICAL DATA
	Torque	See Torque Specifications in text and appropriate graphics under CONVENTIONAL BRAKE SYSTEM
Charging
Generator		GENERATOR INSPECTION [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] or GENERATOR INSPECTION [SKYACTIV-G 2.5T]
Torque		See Torque Specifications in text and appropriate graphics under CHARGING SYSTEM
Drive Belts
Adjustment		Engine uses Self-Adjusting Serpentine Drive Belt
Drive Belt Routing		NA
Engine Cooling
General Service Specifications		TECHNICAL DATA - ENGINE (SKYACTIV-G 2.5T) or TECHNICAL DATA - ENGINE [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)]
	Radiator Cap Pressure	13.6-17.7 psi
	Thermostat R & I	THERMOSTAT REMOVAL/INSTALLATION (2.5T) or COOLANT CONTROL VALVE REMOVAL/INSTALLATION (2.5L)
	Water Pump R & I	WATER PUMP REMOVAL/INSTALLATION (2.5T) or WATER PUMP REMOVAL/INSTALLATION (2.5L)
Engine Mechanical
SKYACTIV-G 2.5T
	Compression	COMPRESSION INSPECTION
	Oil Pressure	Lo: 135-165 kPa {1.38-1.68 kgf/² , 19.6-23.9 psi} [1, 500 RPM] Hi: 225-275 kPa {2.30-2.80 kgf/² , 32.7-39.8 psi} [4, 500 RPM]
	Overhaul	TECHNICAL DATA - ENGINE (SKYACTIV-G 2.5T)
	Torque	See Torque Specifications in text and appropriate graphics under TECHNICAL DATA - ENGINE (SKYACTIV-G 2.5T) .
SKYACTIV-G 2.5
	Compression	COMPRESSION INSPECTION
	Oil Pressure	Lo: 135-165 kPa {1.38-1.68 kgf/² , 19.6-23.9 psi} [1, 500 RPM] Hi: 225-275 kPa {2.30-2.80 kgf/² , 32.7-39.8 psi} [4, 500 RPM]
	Overhaul	TECHNICAL DATA - ENGINE [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)]
	Torque	See Torque Specifications in text and appropriate graphics under ENGINE MECHANICAL SYSTEM [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] .
Fluid Specifications		See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate/Drive Plate Torque		A/T = 80-85 Ft. Lbs. (108-116 N.m)
Fuel System
Pressure Specification		SKYACTIVE-G 2.5T - 545-695 kPa {5.56-7.08 kgf/cm² , 79.1-100.0 psi} SKYACTIVE-G 2.5L - 405-485 kPa {4.13-4.94 kgf/cm² , 58.8-70.3 psi}
	Fuel Pressure Test Procedure	SKYACTIVE-G 2.5T - FUEL LINE PRESSURE INSPECTION SKYACTIVE-G 2.5L - FUEL LINE PRESSURE INSPECTION
	Fuel Filter Location	Hi And Low Pressure Fuel Filters Are Attached To Fuel Pump Unit In Fuel Tank.
	Fuel Filter R & I	SKYACTIVE-G 2.5T - FUEL FILTER (HIGH-PRESSURE) REMOVAL/INSTALLATION SKYACTIVE-G 2.5L - FUEL FILTER (HIGH-PRESSURE) REMOVAL/INSTALLATION
Ignition
Firing Order & Cylinder Identification		See FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires (Resistance)		NA Coil On Plug
Ignition Wires (Routing)		NA Coil On Plug
Spark Plug
	SKYACTIVE-G 2.5T - PY8V-18-110
	SKYACTIVE-G 2.5L - PE5R-18-110, PE5S-18-110
	Gap	Spark plug gap [PY8V-18-110] Standard: 0.70-0.85mm {0.028-0.033 in} New spark plug (reference): 0.70-0.80mm {0.028-0.031 in} Spark plug gap [PE5R-18-110, PE5S-18-110] Standard: 1.05-1.40 mm {0.0414-0.0551 in} New spark plug (reference): 1.05-1.15 mm {0.0414- 0.0452 in}
	Torque	15-20 N.m {1.6-2.0 kgf.m, 12-14 ft.lbf}
Starting
Starter		STARTER INSPECTION (2.5T) or STARTER INSPECTION (2.5L)
Torque		See STARTER REMOVAL/INSTALLATION (2.5T) or STARTER REMOVAL/INSTALLATION (2.5L)
Wheel Alignment
	Adjustment Specifications	SUSPENSION TECHNICAL DATA
	Torque	See Torque Specifications in text under SUSPENSION TECHNICAL DATA and WHEEL ALIGNMENT
Wheel & Tire
Wheel Lug Nut Torque		108-147 N.m {12-14 kgf.m, 80-108 ft.lbf}
Wheel Lug Nut Tightening Sequence		See WHEEL AND TIRE INSTALLATION