LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Front Suspension System) >> Front Lower Arm Removal/Installation >> Front Lower Arm Ball Joint Installation Note

Front Lower Arm Ball Joint Installation Note

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the front lower arm ball joint installation nut.
    G11278981Courtesy of MAZDA MOTORS CORP.
  2. Disconnect the steering knuckle and front lower arm ball joint end using the SST.
    G11278982Courtesy of MAZDA MOTORS CORP.
  3. Remove the front lower arm ball joint installation nut.
    G11278983Courtesy of MAZDA MOTORS CORP.
  4. Suspend the steering knuckle to the coil spring as shown in the figure after removing the front lower arm ball joint.
    G11278984Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals