Fuel Tank Installation Note

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Install the following parts as a single unit:
- Fuel tank
- Insulator
- Fuel pump unit
- Pressure control valve (U.S.A. and CANADA specs.)
- Evaporative hose No. 2 (Except U.S.A. and CANADA specs.)
Temporarily tighten the bolt as shown in the figure.

Courtesy of MAZDA MOTORS CORP.
Tighten the bolt as shown in the figure.

Courtesy of MAZDA MOTORS CORP.

Tightening torque

22-30 N.m {2.3-3.0 kgf.m, 17-22 ft.lbf}
Tighten the bolt as shown in the figure.

Courtesy of MAZDA MOTORS CORP.

Tightening torque

22-30 N.m {2.3-3.0 kgf.m, 17-22 ft.lbf}