Resistance Inspection
WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the seal cover. (See SEAL COVER REMOVAL/INSTALLATION .)
- Disconnect the fuel injector connector.
- Inspect the resistance between fuel injector terminals A and B.
Fuel injector resistance
1.23-2.03 ohms [Surrounding temperature: 0-80°C {32-176°F}]
- If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION .)