ODDTC Self Test
WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to the DLC-2.
- Verify the following vehicle conditions:
- All the switches are turned off (except the ignition switch).
- All the doors, hood, and trunk are closed.
- All the doors, and trunk are unlocked.
- All the seat belts are unbuckled.
- Parking brake lever is pulled.
- After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- Select "Self Test".
- Select "Modules".
- Select "BCM".
- Verify the DTC according to the directions on the screen.
- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection after recording the snapshot data. (See DTC TABLE (BCM) .)
- After completion of repairs, clear all DTCs stored in the BCM. (See CLEARING DTC (BCM) .)