LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Conventional Brake System) >> Power Brake Unit Inspection >> Using SST >> After-inspection procedure

After-inspection procedure

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. After the inspection, remove the SSTs, install the brake pipe to the original position, and then bleed the air from the brake line. (See FRONT BRAKE HOSE REMOVAL/INSTALLATION (WITH SINGLE PISTON FLOATING CALIPER) .) (See FRONT BRAKE HOSE REMOVAL/INSTALLATION (WITH 4-POT OPPOSED PISTON CALIPER) .) (See BRAKE FLUID AIR BLEEDING .)
scientia non olet · About LEMON Manuals