LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (Engine Control System) >> Camshaft Position (CMP) Sensor Removal/Installation >> Exhaust CMP Sensor

Exhaust CMP Sensor

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the front suspension tower bar (joint). (Vehicles with front suspension tower bar) (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION .)
  3. Disconnect the exhaust CMP sensor connector.
  4. Remove the bolt.
    Fig 1: Exhaust Camshaft Position Sensor Bolt With Torque Specification
    G11274155Courtesy of MAZDA MOTORS CORP.
  5. Remove the exhaust CMP sensor.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals