Oil Pump Driven Sprocket Installation Note
WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Temporarily assemble the crankshaft pulley lock bolt, and lock the oil pump against rotation as shown in the figure.
 Courtesy of MAZDA MOTORS CORP.
|
- Install the oil pump driven sprocket.
Tightening torque
26-36 N.m {2.7-3.6 kgf.m, 20-26 ft.lbf}
- Remove the temporarily assembled crankshaft pulley lock bolt.