Front Abs Wheel-Speed Sensor Removal/Installation
WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the front mudguard No. 1 and front deflector as a single unit. (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
- After installation, verify that there is no twisting in the front ABS wheel-speed sensor.
COMPONENT DESCRIPTION
| 1 | Connector |
| 2 | Harness clip |
| 3 | Bolt |
| 4 | Grommet |
| 5 | Front ABS wheel-speed sensor |