Accessory Socket Inspection
WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the accessory socket. (See ACCESSORY SOCKET REMOVAL/INSTALLATION .)
- Connect the tester probe to the position shown in the figure and verify that there is continuity between accessory socket terminal B and C.
- If it cannot be verified, replace the accessory socket. (See ACCESSORY SOCKET REMOVAL/INSTALLATION .)