LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Interior Trim) >> Wind Blocker Removal/Installation

Wind Blocker Removal/Installation

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the wind blocker in the direction of the arrow shown in the figure and remove it while pulling out the tabs.
    G13491391Courtesy of MAZDA MOTORS CORP.
  2. Install in the reverse order of removal.