Electrical System: Connectors: Inspection
WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- To prevent damage to the terminal, wrap a thin wire around the tester probe before inserting into terminal.
- When a tester is used to inspect for continuity or measuring voltage, insert the tester probe from the wiring harness side.
 Courtesy of MAZDA MOTORS CORP.
|
- Inspect the terminals of waterproof connectors from the connector side since they cannot be accessed from the wiring harness side.
 Courtesy of MAZDA MOTORS CORP.
|