LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-30 Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting - Engine >> Vibration Concerns (Engine) (Us) >> Diagnostic Procedure

Diagnostic Procedure

VIBRATION CONCERNS - ENGINE (SKYACTIV-G, US) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 VERIFY PART INSTALLATION CONDITION
  • Inspect the following components for loose attaching bolts or worn parts:
    • Cooling fan
    • Drive belt and pulley
    • Engine mounts
    • Exhaust system
      • Battery
  • Is there any malfunction?
Yes Readjust installation position or retighten the suspect parts.
Repair or replace the malfunctioning part according to the inspection results for other parts.
Go to repair completion verification.
No Inspect the following systems:
  • Wheels
  • Transmission and mounts
  • Driveline
  • Suspension
  • Engine compartment
    • If there is any malfunction:
      • Repair or replace the malfunctioning location and perform the repair completion verification.
    • If there is no malfunction:
      • Go to repair completion verification.
Repair completion verification 1 VERIFY THAT VEHICLE IS REPAIRED
  • Install/connect the part removed/disconnected during the troubleshooting procedure.
  • Has the malfunction symptom been eliminated?
Yes Complete the symptom troubleshooting. (Explain contents of repair to customer)
No Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)] .)
  • If the CAN communication is normal, perform the diagnosis from Step 1.
    • If the malfunction recurs, go to the next step.
Repair completion verification 2 VERIFY IF MALFUNCTION IS CAUSED BY NOT PERFORMING PCM REPROGRAMMING
  • Verify repair information and verify that there is a new calibration in the PCM.
  • Is there a new calibration in the PCM?
Yes Perform the PCM reprogramming and verify if the malfunction symptom was corrected.
No Replace the PCM.
(See PCM REMOVAL/INSTALLATION [SKYACTIV-G (VIN M (US))] .)
(See PCM REMOVAL/INSTALLATION [SKYACTIV-G (VIN L (US))] .)