LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-30 Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting - Engine >> Emission Compliance (Us) >> Notes

Emission Compliance (Us): Notes

EMISSION COMPLIANCE (SKYACTIV-G, US) DESCRIPTION AND POSSIBLE CAUSE

Troubleshooting item Emission compliance
Description
  • Fails emissions test.
Possible cause
  • Engine overheating
  • Cooling system malfunction
  • PCM DTC is stored
  • Incorrect fuel injection timing
  • Incorrect ignition timing
    • Spark plug malfunction
    • Ignition coil malfunction
    • CMP sensor malfunction
      • CKP sensor malfunction
  • Purge solenoid valve malfunction
  • Inadequate fuel pressure
    • Fuel leakage at the fuel line and/or fuel injector
    • Fuel pressure sensor or related circuit malfunction
    • High pressure fuel pump malfunction
    • Spill valve control solenoid valve control circuit malfunction (damage to driver in PCM caused by short circuit to ground system)
    • Spill valve control solenoid valve malfunction (built-into high pressure fuel pump)
    • Relief valve (built-into high pressure fuel pump) malfunction
    • Fuel line restriction
      • Fuel pump unit malfunction
  • Air leakage from intake-air system
  • Vacuum lines leakage or blockage
  • Charcoal canister main damage (U.S.A. and CANADA)
  • Charcoal canister sub damage (U.S.A. and CANADA)
  • Charcoal canister damage (Except (U.S.A. and CANADA))
  • Improper engine coolant level
  • Excessive carbon built-up in combustion chamber
  • Improper engine compression
  • Improper intake valve timing
  • Improper exhaust valve timing
  • Exhaust system and/or TWC restriction
  • Exhaust gas leakage from exhaust system
  • TWC malfunction (PCM DTC is stored.)
  • Positive crankcase ventilation system malfunction
    • PCV valve malfunction or incorrect valve installation
      • Clogging in positive crankcase ventilation system hoses (PCV valve hose, ventilation hose)
    WARNING:
    • The following troubleshooting flow chart contains the fuel system diagnosis and repair procedures. Read the following warnings before performing the fuel system services:
    CAUTION:
    • Disconnecting/connecting the quick release connector without cleaning it may possibly cause damage to the fuel pipe and quick release connector. Always clean the quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.
System wiring diagram
  • Not applicable
Connector diagram
  • Not applicable