LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-3 AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC HU/Cm Removal/Installation >> Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment marks on the brake pipe and DSC HU/CM.
    G13150387Courtesy of MAZDA MOTORS CORP.
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Disconnect the brake pipes.
scientia non olet · About LEMON Manuals