LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2020
>>
6 Signature
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 11 (Engine Control System (VIN M))
>>
Pcm Inspection
>>
Inspection Using An Oscilloscope (Reference)
>>
A/F Sensor Heater Control Signal
A/F Sensor Heater Control Signal
WARNING:
This page is about a different variant/trim than selected.
Fig 1: A/F Sensor Heater Control Wave Pattern Signal
Courtesy of MAZDA MOTORS CORP.
PCM terminals
1CB (+)-bodyground (-)
Oscilloscope setting
5 V/DIV (Y), 50 ms/DIV (X), DC range
Vehicle condition
Idle after warm up
Courtesy of MAZDA MOTORS CORP.