Deflector Removal/Installation
- Fully open the glass panel.
- Rotate a tape-wrapped flathead screwdriver in the direction of the arrow (1) shown in the figure below and remove the spring in the direction of the arrow (2) shown in the figure below from hooks.
CAUTION:
- If the spring is removed forcefully, hook located at the spring installation area may be damaged. Carefully remove the spring so as not to damage hook.
Courtesy of MAZDA MOTORS CORP.
- Remove the deflector in the direction of the arrow in the order of (3), (4) shown in the figure below.
Courtesy of MAZDA MOTORS CORP.
- Install in the reverse order of removal.