LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> 6 Signature >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Trunk Side Pocket Removal/Installation

Trunk Side Pocket Removal/Installation

  1. Remove the trunk covering. (See TRUNK COVERING REMOVAL/INSTALLATION .)
  2. Remove the trunk board. (See TRUNK BOARD REMOVAL/INSTALLATION .)
  3. Remove the fasteners. (LH side only)
    Fig 1: Trunk Side Pocket
    G12236528Courtesy of MAZDA MOTORS CORP.
  4. Remove the trunk side pocket in the direction of the arrows shown in the figure below.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals