LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> 6 Signature >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Audio Panel Removal/Installation

Audio Panel Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the meter hood cover. (See METER HOOD COVER REMOVAL/INSTALLATION .)
  3. Move the audio panel in the order of arrows (1), (2) shown in the figure below, and detach the clips A and clip B.
    Fig 1: Moving Audio Panel
    G12236354Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the push button start connector.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals