LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> 6 Signature >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Pocket Light Removal/Installation >> Front

Pocket Light Removal/Installation: Front

  1. Switch the ignition off.
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the harness.
    Fig 1: Pocket Light, Connector, Front Door Trim And Screw
    G12234983Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the connector.
  6. Remove the screw.
  7. Remove the pocket light.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals